Cisco CATALYST 9163E AP(W6E TRI-BAND

●  CW9163E-x: Cisco Catalyst 9163E outdoor access point

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

●  CW9163E-MR: Cisco Catalyst 9163E Outdoor Access Point, w/Meraki

Cloud-managed version using Meraki dashboard

Cisco wireless LAN services

●  For details on optional WLAN services, visit Services for Wireless and Mobility

Note: Antennas are not included with the CW9163E access point. See the antenna section for a list of supported antennas.

●  Maximal Ratio Combining (MRC)

●  802.11n and 802.11a/g

●  20- and 40-MHz channels

●  PHY data rates up to 750 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

●  802.11 Dynamic Frequency Selection (DFS)

●  Cyclic Shift Diversity (CSD) support

●  MRC

●  802.11ac beamforming

●  20-, 40-, 80-, channels

●  PHY data rates up to 867Mbps (2×2 80MHz on 5 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  Wi-Fi Protected Access (WPA) 3 support

●  2×2 downlink MU-MIMO with two spatial streams (2.4 GHz, 5 GHz, and 6 GHz)

●  Uplink/downlink OFDMA

●  TWT

●  BSS coloring

●  MRC

●  802.11ax beamforming

●  20-, 40-, 80-, and 160-MHz channels (6 GHz)

●  20-, 40-, and 80-MHz, channels (5 GHz)

●  20-MHz channels (2.4 GHz)

●  PHY data rates up to 3.9 Gbps (2×2 160 MHz on 6 GHz, 2×2 80 MHz on 5 GHz, and 2×2 20 MHz on 2.4 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

●  2.4 GHz: Peak gain 4 dBi, omnidirectional in azimuth

●  5 GHz: Peak gain 8 dBi, omnidirectional in azimuth

●  6 GHz: Peak gain 8 dBi, omnidirectional in azimuth

CW-ANT-D1-NS-00 4-Port Directional Patch Self-Identifying Antenna with N-Type Connectors

●  2.4 GHz: Peak gain 8 dBi, directional antenna, (75×30)

●  5 GHz: Peak gain 9 dBi, directional antenna, (60×30)

●  6 GHz: Peak gain 9 dBi, directional antenna, (72×27)

CW-ANT-GPS2-S-00 Active GNSS/GPS Antenna with RP-SMA Connector

●  Optional GNSS/GPS external antenna

●  L1/L5 frequency bands

●  Integrated mounting bracket for wall or pole mounting

●  10ft cable with RP-SMA connector

●  Management console port (RJ-45)

●  4x N-Type Wi-Fi antenna connectors

●  RP-SMA active GPS/GNSS antenna connector

◦      9.64 x 9.64 x 2.5 in. (245 x 245 x 63.5 mm)

●  Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6

●  Nonoperating (storage) altitude test: 25°C (77°F) at 15,000 ft (4600 m)

●  Operating temperature: -40° to 149°F (-40° to 65°C) without solar derating

●  Operating temperature: -40° to 131°F (-40° to 55°C) with solar derating

●  Operating humidity: 5% to 95% (noncondensing)

●  Operating altitude test: 40°C (104°F) at 9843 ft (3000 m)

●  Ingress Protection: IP67

●  Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts

●  Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.)

●  Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas)

●  Solar radiation: EN 60068-2-5 (753 W/m2)

●  Vibration: MIL-STD-810E, Method 514.4 (0.41 Grms from 5Hz to 500Hz, 2 hours per each axis X,Y,Z)